A remote-controlled feeder for scheduled and portioned feeding.
Features:
- WiFi-enabled with app control
- Programmable up to 10 meals/day (60 portions max per meal)
- Dual power supply (USB & battery backup)
- 4L capacity, ideal for small to medium pets
- Easy-to-clean detachable design
Specifications:
- Material: ABS / SUS 304 / PC
- Capacity: 4L
- Power: 5V DC / 1A, 4 x AA Batteries (not included)
- Size: 18.2 × 18.2 × 35 cm
Attention Please: 1,It is not recommended for pets less than three months old. 2,It is recommended to use indoors, do not directly expose to sunlight and keep away from fire source 3,Please use the original power adapter to avoid the device damage or failure to work 4,It is strictly forbidden to soak in water 5,To prevent pets from falling over the feeder, it is recommended to place it in the corner or against the wall. 6,Children should use under the guidance of adults 7,Do not soak the desiccant in water.if damaged,do not continue to use it. 8,If you move or stop using the product,please unplug the power cable and remove the bottom battery. 9,Except for the maintenance personnel,do not disassemble and repair the product to avoid accidental injury.
Installation Instructions:
1.Add Food
2.Press the lid button to open and add food
3.Add Desiccant
4.Take off the lid and open the desiccant box, place the desiccant then close it
5.Install the Food Bowl
6.Place the bowl on ground and main body stuck down, as the picture shows
7.Power-On: Connect charging cable to power supply and type-C charging port at the bottom of feeder
9.Add Pet dry food and put the lid(Suitable for 4-12mm (0.16-0.47in) diameter dry food)
How to Connect the APP:
1.Download the APP "ROJECO" from APP store or Android APP Market
2.Then " +Add Device" On the the home page, please connect the device with the reminder
3.Note: Please make sure the bluetooth is turn on when connecting to the network for the first time.
4.Scan the code to download the "ROJECO" APP
How to schedule feeding plan by APP:
Set the feeding plan in the APP after connected, it could automatically fed as schedule, also can receive feeding records everytime.
How to Manual Feeding:
Double click the manual feeding button then give one portion of the food(about 5g) each time.
(It also can be controlled by APP)
How to Reset Wifi Connection:
Hold the feeding button for 5 Seconds, the wifi/bluetooth indicator flash quickly then reset succeeds.
Indicator Description:
Green light slowly flashes: Waiting for connection
Green Light stays on: Connected
Red Light slowly flashes: Lack of food
Red light quickly flashes: Feeder is stuck
Red light off: Enough food
Questions & Answers
Question1: Why network connecting is not successful?
Answer: 1.Confirm whether it is tourist mode, please register for the APP account on first using.
2. Make sure that the network password is entered correctly.
3. Please make sure to use 2.4G WiFi network, this product does not support 5G WiFi.
4. Please make sure that the WiFi working on good condition, it is recommended that the distance is not more than 20 meters to avoid poor network connecting.
Question2: Why the device cannot be searched?
Answer: If there is no distribution network for a long time after booting, it is possible to search for the device when the network is distributed again, please press the feeding button for 6S, and then add the device to search for the device.
Question3: Why no food dispensed?
Answer: 1.Please check whether remaining food is sufficient.
2.Please make sure that pet food is dry food, this product only supports dry food used.
3.This product can be added to no more than 20% lyophilized food and its size must be less than 12 mm.
4.Please confirm whether the feeding channel is full, it will reduce the number of feeding portions.
5.If feeder is stuck, please clean it up and go on using after ensuring the problem solved.
Question4: Why does not work after power supplied?
Answer: 1.Please check whether the plug is correctly connected to the power supply,
2.Whether the machine is connected by type C charging port without problem.
3.Whether the power indicator light is on normally
